Aurelia Butler

Ultrashort pulses of light are proven indistinguishable from continuous illumination, in terms of controlling the electronic states of atomically-thin material tungsten disulfide (WS2).
A new, Swinburne-led study proves that ultrashort pulses of light can be used to drive transitions to new phases of matter, aiding the search for future Floquet-based, low-energy electronics.
There is significant interest in transiently controlling the band-structure of a monolayer semiconductor by using ultra-short pulses of light to create and control exotic new phases of matter.
The resulting temporary states known as Floquet-Bloch states are interesting from a pure research standpoint as well as for a proposed new class of transistor based on Floquet topological insulators (FTIs).
In an important finding, the ultra-short pulses of light necessary for detecting the formation of Floquet states were shown to be as effective in triggering the state as continuous illumination, an important question that, until now, had been largely ignored.
A CONTINUOUS WAVE OR ULTRASHORT-PULSES: THE PROBLEM WITH TIME
Floquet physics, which has been used to predict how an insulator can be transformed into an FTI, is predicated on a purely sinusoidal field, ie continuous, monochromatic (single wavelength) illumination that has no beginning or end. More

Inequalities in income affect how well children do in maths — but not reading, the most comprehensive study of its kind has found.
Looking at data stretching from 1992 to 2019, the analysis, published in the journal Educational Review, revealed that 10-year-olds in US states with bigger gaps in income did less well in maths than those living in areas of America where earnings were more evenly distributed.
With income inequality in the US the highest in the developed world, researcher Professor Joseph Workman argues that addressing social inequality may do more to boost academic achievement than reforming schools or curricula — favoured methods of policymakers.
Income inequality — a measure of how unevenly income is distributed through a population — has long been associated with a host of health and social problems including mental health issues, lack of trust, higher rates of imprisonment and lower rates of social mobility.
It may also affect academic achievement, through various routes.
For instance, income inequality is linked to higher rates of divorce, substance abuse and child maltreatment, the stresses of which may affect a child’s development. It is also associated with higher odds of babies being of a low weight a birth — something which can raise their risk of developmental delays as they grow up. More

Automated vehicles could be made more pedestrian-friendly thanks to new research which could help them predict when people will cross the road.
University of Leeds-led scientists investigating how to better understand human behaviour in traffic say that neuroscientific theories of how the brain makes decisions can be used in automated vehicle technology to improve safety and make them more human-friendly.
The researchers set out to determine whether a decision-making model called drift diffusion could predict when pedestrians would cross a road in front of approaching cars, and whether it could be used in scenarios where the car gives way to the pedestrian, either with or without explicit signals. This prediction capability will allow the autonomous vehicle to communicate more effectively with pedestrians, in terms of its movements in traffic and any external signals such as flashing lights, to maximise traffic flow and decrease uncertainty.
Drift diffusion models assume that people reach decisions after accumulation of sensory evidence up to a threshold at which the decision is made.
Professor Gustav Markkula, from the University of Leeds’ Institute for Transport Studies and the senior author of the study, said: “When making the decision to cross, pedestrians seem to be adding up lots of different sources of evidence, not only relating to the vehicle’s distance and speed, but also using communicative cues from the vehicle in terms of deceleration and headlight flashes.
“When a vehicle is giving way, pedestrians will often feel quite uncertain about whether the car is actually yielding, and will often end up waiting until the car has almost come to a full stop before starting to cross. Our model clearly shows this state of uncertainty borne out, meaning it can be used to help design how automated vehicles behave around pedestrians in order to limit uncertainty, which in turn can improve both traffic safety and traffic flow. More

Biologists at Cold Spring Harbor Laboratory (CSHL) are using a mathematical approach developed in CSHL Assistant Professor David McCandlish’s lab to find solutions to a diverse set of biological problems. Originally created as a way to understand interactions between different mutations in proteins, the tool is now being used by McCandlish and his collaborators to learn about the complexities of gene expression and the chromosomal mutations associated with cancer. McCandlish says:
“This is one of the things that’s really fascinating about mathematical research, is sometimes you can see connections between topics, which on the surface they seem so different, but at a mathematical level, they might be using some of the same technical ideas.”
All of these questions involve mapping the likelihood of different variations on a biological theme: which combinations of mutations are most likely to arise in a particular protein, for example, or which chromosome mutations are most often found together in the same cancer cell. McCandlish explains that these are problems of density estimation — a statistical tool that predicts how often an event happens. Density estimation can be relatively straightforward, such as charting different heights within a group of people. But when dealing with complex biological sequences, such as the hundreds, or thousands of amino acids that are strung together to build a protein, predicting the probability of each potential sequence becomes astonishingly complex.
McCandlish explains the fundamental problem his team is using math to address: “Sometimes if you make, say one mutation to a protein sequence, it doesn’t do anything. The protein works fine. And if you make a second mutation, it still works fine, but then if you put the two of them together, now you’ve got a broken protein. We’ve been trying to come up with methods to model not just interactions between pairs of mutations, but between three or four or any number of mutations.”
The methods they have developed can be used to interpret data from experiments that measure how hundreds of thousands of different combinations of mutations impact the function of a protein.
This study, reported in the Proceedings of the National Academy of Sciences, began with conversations with two other CSHL colleagues: CSHL Fellow Jason Sheltzer and Associate Professor Justin Kinney. They worked with McCandlish to apply his methods to gene expression and the evolution of cancer mutations. Software released by McCandlish’s team will enable other researchers to use these same approaches in their own work. He says he hopes it will be applied to a variety of biological problems.
Story Source:
Materials provided by Cold Spring Harbor Laboratory. Original written by Jennifer Michalowski. Note: Content may be edited for style and length. More

In what should be a win-win-win for the environment, a process developed at Rice University to extract valuable metals from electronic waste would also use up to 500 times less energy than current lab methods and produce a byproduct clean enough for agricultural land.
The flash Joule heating method introduced last year to produce graphene from carbon sources like waste food and plastic has been adapted to recover rhodium, palladium, gold and silver for reuse.
A report in Nature Communications by the Rice lab of chemist James Tour also shows highly toxic heavy metals including chromium, arsenic, cadmium, mercury and lead are removed from the flashed materials, leaving a byproduct with minimal metal content.
Instantly heating the waste to 3,400 Kelvin (5,660 degrees Fahrenheit) with a jolt of electricity vaporizes the precious metals, and the gases are vented away for separation, storage or disposal. Tour said that with more than 40 million tons of e-waste produced globally every year, there is plenty of potential for “urban mining.”
“Here, the largest growing source of waste becomes a treasure,” Tour said. “This will curtail the need to go all over the world to mine from ores in remote and dangerous places, stripping the Earth’s surface and using gobs of water resources. The treasure is in our dumpsters.”
He noted an increasingly rapid turnover of personal devices like cell phones has driven the worldwide rise of electronic waste, with only about 20% of landfill waste currently being recycled. More

In a surprising discovery, an international team of researchers, led by scientists in the University of Minnesota Center for Quantum Materials, found that deformations in quantum materials that cause imperfections in the crystal structure can actually improve the material’s superconducting and electrical properties.
The groundbreaking findings could provide new insight for developing the next generation of quantum-based computing and electronic devices.
The research just appeared in Nature Materials, a peer-reviewed scientific journal published by Nature Publishing Group.
“Quantum materials have unusual magnetic and electrical properties that, if understood and controlled, could revolutionize virtually every aspect of society and enable highly energy-efficient electrical systems and faster, more accurate electronic devices,” said study co-author Martin Greven, a Distinguished McKnight Professor in the University of Minnesota’s School of Physics and Astronomy and the Director of the Center for Quantum Materials. “The ability to tune and modify the properties of quantum materials is pivotal to advances in both fundamental research and modern technology.”
Elastic deformation of materials occurs when the material is subjected to stress but returns to its original shape once the stress is removed. In contrast, plastic deformation is the non-reversible change of a material’s shape in response to an applied stress — or, more simply, the act of squeezing or stretching it until it loses its shape. Plastic deformation has been used by blacksmiths and engineers for thousands of years. An example of a material with a large plastic deformation range is wet chewing gum, which can be stretched to dozens of times its original length.
While elastic deformation has been extensively used to study and manipulate quantum materials, the effects of plastic deformation have not yet been explored. In fact, conventional wisdom would lead scientists to believe that “squeezing” or “stretching” quantum materials may remove their most intriguing properties. More

Apples are among the oldest and most recognizable fruits in the world. But have you ever really considered an apple’s shape? Apples are relatively spherical except for that characteristic dimple at the top where the stem grows.
How do apples grow that distinctive shape?
Now, a team of mathematicians and physicists have used observations, lab experiments, theory and computation to understand the growth and form of the cusp of an apple.
The paper is published in Nature Physics.
“Biological shapes are often organized by the presence of structures that serve as focal points,” said L Mahadevan, the Lola England de Valpine Professor of Applied Mathematics, of Organismic and Evolutionary Biology, and of Physics at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) and senior author of the study. “These focal points can sometimes take the form of singularities where deformations are localized. A ubiquitous example is seen in the cusp of an apple, the inward dimple where the stalk meets the fruit.”
Mahadevan had already developed a simple theory to explain the form and growth of apples but the project began to bear fruit when the researchers were able to connect observations of real apples at different growth stages and gel experiments to mimic the growth along with theory and computations. More